What is the Perfume Project?

This blog is a constantly evolving forum for thoughts on perfume, perfume-making, plants (especially orchids and flora of the Pacific Northwest) and life in general. It started out chronicling the adventures of Olympic Orchids Perfumes, established in July 2010, and has expanded in other directions. A big part of the blog is thinking about the ongoing process of learning and experimentation that leads to new perfumes, the exploration of perfumery materials, the theory and practice of perfume making, the challenges of marketing perfumes and other fragrance products, and random observations on philosophy and society. Spam comments will be marked as such and deleted; any comments that go beyond the boundaries of civil discourse will also be deleted. I am grateful to all of you, the readers, who contribute to the blog by commenting and making this a truly interactive perfume project.

Wednesday, January 27, 2016

PERFUME MATERIALS: THE HUMBLE LIQUID CARRIER

Before moving on to a series on what we usually think of as the perfume materials themselves, I thought it might be interesting to consider the component of most perfumes that everyone takes for granted, the carrier. Perfumes are generally fragrance materials diluted with a more or less odorless substance, never completely odorless, but benign enough to be masked and/or quick to evaporate.

Alcohol
By far the most common carrier is alcohol, usually 95% ethanol (ethyl alcohol), the same alcohol that’s in alcoholic beverages. Perfumer’s alcohol is typically grain alcohol that contains a bitter, low-odor “denaturant” that renders it unpalatable to drink, thus minimizing the chances that the alcohol could be resold as a beverage without the authorities having collected beverage taxes on it. If you see “SD alcohol” or “alcohol denat” on a perfume label, it just stands for “specially denatured alcohol”.

Some perfumers also use non-denatured alcohol, which can be obtained with the proper type of license. It is usually considerably more expensive than SD alcohol, and may be produced by craft distilleries that cater to the beverage and/or natural perfumery trade. Popular types of non-denatured alcohol include grain or potato alcohol, which have very little extra odor from the plant matter that was fermented and distilled, grape alcohol, which has a strong grappa smell, and sugar cane alcohol, which has a rum-like smell. These special effects are fine, if you want them in your perfume, but because of the extra expense and extra smells, most perfumers stick with the garden-variety SD alcohol.

Because alcohol is a non-polar solvent, it works well with most essential oils and aroma chemicals, which readily go into solution in alcohol and stay there. It is volatile, so evaporates quickly, leaving the less volatile fragrance materials behind for our enjoyment. Alcohol-based solutions are thin enough to easily be sprayed. The only down side is that ethanol is flammable at relatively low temperatures and has some smell of its own. Other than that, it’s the ideal carrier.

Oil
Oil is another traditional carrier for perfumes. Like alcohol, it easily mixes with essential oils and aroma chemicals. However, not every oil can work as a perfume base. Many oils have strong smells of their own (think about olive oil, or sesame oil). Unless the scent of the carrier oil is intended to be part of the fragrance, it is best to use low-odor oils. The other problem with oils is that many of them go rancid quickly. I will never forget pulling out some samples of oil-based perfumes that had been sitting around for about a year and being hit with the smell of rancid oil. It was so bad that I had to throw them away.  The oils that I’ve used that tend not to go rancid are argan and fractionated coconut oil (FCO). Grapefruit seed oil can be added as a natural preservative and, of course, there are lots of synthetic preservatives that will work with oil.
Traditional attars are made from flowers or other materials distilled into a carrier of sandalwood oil or vetiver oil, both of which have their own scent that contributes to the attar. Today some attars are distilled into diethylphthalate (DEP) or dioctylphthalate (DOP), which act as cheap substitutes for the traditional oils. If you are buying attars and want to avoid phthalates, you should find out what the carrier is.  Oil-based perfumes tend to go on sticky, with the fragrance developing more slowly than it does in alcohol-based ones.

Water
I have tried a few water-based perfumes and was not impressed. First, most fragrance materials are not soluble in water, so the best that can be done is to produce a suspension or emulsion of the oils or aroma chemicals. For this reason, water-based perfumes tend to be cloudy. The amount of fragrance that can be added to water is limited, so they are usually quite weak.


Concentrations of fragrance materials in carrier are all over the place, ranging from minute amounts of fragrance materials to the pure concentrate. The highest concentrations are found in attars and concentrated perfume oils (CPOs), followed (in theory) by extraits/parfum, eau de parfum (EdP), eau de toilette (EdT), eau de cologne (EdC), and body sprays, which typically use a carrier with a high ratio of water to alcohol. However, you can’t really go by these designations because an EdT may smell stronger than an extrait. It depends on the fragrance itself and how the manufacturer defines the terms.

[Except for (maybe) the 190 proof grain alcohol in the first photo, all are things that should not be in perfume, just included for the visual interest. All images are from Wikimedia] 

11 comments:

  1. What carriers are typically used for solid perfumes? I don't wear solid perfumes often, but they do strike me as being extremely convenient. I would also suspect the perfume development would be similar between a solid perfume and an oil?

    ReplyDelete
    Replies
    1. Yuki, I was going to include solid perfume carriers, but the post was getting too long. Maybe it needs a part 2!

      Delete
    2. I look forward to reading about it in a future post! :)

      Delete
  2. Hi Ellen,

    Thank you for this great information! I have one question. Every bottle of argan oil I have ever purchased from various suppliers has had a strong, and to me, unpleasant odor. In every case the odor dissipated quickly and I used the product, but now I'm wondering if every one of these bottles could have been rancid?

    I was also bummed to learn that the fragrance materials in my beloved, cheap CPOs probably are nesting in phthalates. I checked the labels and yes they are! Also, I presume the cheapies that don't list anything probably use them too? I wouldn't be surprised if the majority of what I have around here includes phthalates. My higher end CPOs appear to be phthalate free. I am not overly concerned but this is definitely a reason to read the labels (or check the ingredient list online) before purchasing.

    Azar

    ReplyDelete
    Replies
    1. Azar, you are right that most of the cheap CPOs contain phthalates. Personally, I wouldn't worry about using them myself because the quantity is so small and it's not even clear that they are harmful in reasonable quantities. However, I try to make sure that none of the perfumes I sell contain phthalates. It was in researching raw materials that I found out how many cheap oils do contain them.

      Delete
  3. Thank you so much! This article and another one about types of materials were very useful for me.
    Sometimes I play with perfumery materials and tried sweet almond oil once, the result was unsatisfying. But jojoba oil worked well with natural ingredients.
    I'm curious about sd alcohol, so I purchased a bottle today. Is it a good carrier for natural essences? If we use sd alcohol as carrier for natural oils, can we call it an "All Natural"?!

    ReplyDelete
    Replies
    1. Farbod, Jojoba "oil" is used by a lot of people, but it's actually a wax, so may not work well with all materials. The advantage is that it's low-odor and has a relatively long shelf life.

      Yes, SD alcohol is an excellent carrier for natural materials. Whether you call it "all natural" or not depends on how much of a purist you are. I think most people would call it all-natural if the perfume concentrate is all-natural, but the "naturals" far-end extremists might not.

      As in everything else, there's a continuum from raw natural materials in their original state, through processed natural materials, through isolated molecules from natural materials, through molecules synthesized from natural materials, through ... I don't know what because everything starts out as some sort of "natural" substance. Different people draw the "natural vs synthetic" boundary at different places, so you can draw it wherever you're comfortable with it, as long as you disclose where it.

      Delete
    2. Thank you for elucidating me. I hope I can learn more from your blog.

      Delete
  4. Excellent primer! In addition to these I've also tried the silicon-carriers. Mixed results, pretty much like water or oil, but nice for hair smoothers.

    ReplyDelete
    Replies
    1. Marla, I haven't tried silicon carriers, but they sound like they might be a good idea, at lest for things like hair products. I'll have to look into them!

      Delete
  5. Checking in 4 years later :) was wondering if you could give tips on where to purchase alcohol? I know about Everclear from local stores. Any other options without having to pay a ton for shipping?

    ReplyDelete